BricsCad Platinum 13.1.11.41196 139MB
Bricscad®
V13 is our most innovative release so far. It offers Direct Modeling in
native .dwg - no conversion needed - and you can add 3D constraints to
the model and keep full control on them. Modeling in rendered mode is
made easy. You can almost learn it in an hour thanks to the Quad tool,
it reduces clicks to an absolute minimum.
Features:
3D Drawing
Assembly modeling
Assembly
modeling allows you to organize .dwg files in hierarchical structures
of mechanical components to model complex products. Assemble your
products with both top-down and bottom-up design and compose your
assembly with ease with the powerful 3D constraints between faces and
edges of different mechanical components. Use existing geometry
(including one imported from other CAD systems) to form mechanical
components or browse trough thousands of standard X-Hardware parts
(screws, nuts, bearings, ...). View the component hierarchy with the
mechanical browser and maintain visibility in complex assemblies by
hiding components.
Kinematic analysis
Move or rotate parts of your model to solve real-time forward and inverse kinematic problems.
Bill of materials
Generate a top-level or bottom-level list of all mechanical components used in a drawing.
Dynamic UCS
With
the dynamic UCS feature enabled, the coordinate system is aligned
automatically with a face of a solid when drawing entities. Faces
highlight when moving the pointer while a drawing command is active and
the XY plane of the coordinate system aligns with the highlighted face.
When the drawing command finishes, the previous UCS is restored.
3D Direct Modeling in Rendered Mode with the Quad tool
BricsCAD
Pro offers Direct Modeling in native .dwg - no conversion needed. With
the 'Quad'-tool, which reduces clicks to an absolute minimum, modeling
in rendered mode is made easy.
2D and 3D constraint solving
BricsCAD
offers powerful tools for direct solid modeling using geometric
constraints solving. Solid models can be modified by defining
constraints between its elements. If there is a 3D constraint which
fixes the placement of faces or edges, this constraint will be preserved
during your modeling operations. It allows you to parametrize any
feature of the 3D model.
Design Intent Recognition
For
example, consider a model with a number of holes of the same radius.
When the radius of a cylindrical face is modified, other faces that
share the same diameter are recognized and modified automatically to
keep the radii synchronized.
Powerful 3D Render Engine and Materials Editor
BricsCAD
has an extremely powerful rendering engine allowing you to work in
permanent render mode. Materials and lights can be created and edited in
the Materials section of the Drawing Explorer.
Cloud
Chapoo connectivity
With
Chapoo you can upload files and share them with friends and colleagues.
They can view your files in the cloud and annotate them to leave their
comments; no downloading of the files or installation of any software is
required.
Dimensions
Dynamic input and dynamic dimensions
Dynamic
Dimensions are available while creating /editing entities. When moving a
grip point, all related dimensions are displayed in real time and can
be modified on the fly with Dynamic Input.
Associative dimensions
Dimensions
are updated automatically when the geometry has changed. You can even
dimension Model Space entities in Paper Space and see them being updated
when you modify the entities in Model Space. Dimensions can now be
linked to entity snap points such as endpoints, midpoints and
perpendicular.
Interface
Settings manager
In the
Settings Dialog you can check or modify the current value of all
settings. The settings can be viewed alphabetically or categorized,
grouping related settings in a tree view. The built-in search feature
lets you find settings quickly and intuitively.
Mline - Multiline
The Mline command creates multiple parallel lines. You can create and edit your own multiline styles in the Drawing Explorer.
Attribute management
BATTMAN
(Block Attribute Manager): this command allows you to edit all
attribute properties and settings in a block definition, then
synchronize the changes in all block references.
Graphic device per viewport
This
new feature allows you to print a multiple viewport layout of which
each layout has a different shademode applied: e.g. hidden lines
removed, rendered, wireframe.
Sheetsets Manager
A sheet
set is a collection of layouts from different drawing files. The Sheet
Set manager lets you manage existing sheets sets and create new ones
from scratch or based on a template sheet. Sheet sets can be published,
printed and e‐transmitted.
Printing
Page setups
Using
page setups you don't have to go through all the options on the Print
dialog each time you want to print your drawing. All settings can now be
saved to a Page Setup, which can then be applied to a paperspace
layout. Page Setups are saved in the drawing and can be copied between
drawings.
Publish improvements
It is now possible to
reverse the order of the sheets in a sheet list and to move sheets up
and down in the list. A 'Publish in background' option is added.
Other features
Layer filters
Use
expressions and layer properties to filter out sets of layers, and
store filters for reuse. The current layer filter optionally can be
applied to the Layer combo in the Entity Properties toolbar.
Layer explorer
For
layouts and paper space viewports, columns were added for ViewPort (VP)
Color, VP Linetype, VP Lineweight and VP Plot Style.
Block manager
Browse blocks in non-open drawings and insert them in the current drawing from the new Blocks panel in the Drawing Explorer.
Reference editing
The
Refedit tool allows you to edit the content of external references
(Xrefs) and block inserts from within the current drawing, which is
referred to as in-place reference editing. RefEdit either works on a
portion of the reference which you edit or on the entire drawing or all
entities in the block.
Commandline improvements
When
typing a command autocomplete suggestions show in a small popup window.
If the current entry matches a single command, the command name is
completed automatically.
Home Page:
www.bricsys.comOS : Windows 2000/XP/Vista/7
Language : English
Size : 139.17 MB
0 comments Blogger 0 Facebook
Post a Comment